Viva Decor Precious Metal Colour Paint in Gold Was Heat-set on Cured Premo Polymer Clay, by Karen A. Scofield

Viva Decor Precious Metal Colour Heat-Set on Premo Polymer Clay

The Clay

I added crushed, shiny micaceous (meaning it’s loaded with mica) rock, fine gold glitter, and Blank Slate Gold and Silver Flake Mix, in order of volume, to some Premo! polymer clay (a Sculpey product). That’s why it’s sparkly and can appear darker or very light depending on how the light shines on it and it moves, you see sparkles as well as flashes and glints.

Aside: The Backstory on the Micaceous Rockhttps://www.flickr.com/photos/sari0009/19354330223/in/dateposted-..

The Paint (and A Closed US Office)

Spelling

Viva Decor’s US office closed in 2015 and my bottle is labeled “Precious Metal Colour” because that is how the UK spells it. Many sites and blogs still use the US spelling (Precious Metal Color), you may notice.

Viva Decor Closed Their USA Office in 2015. European Offices remain open. 2016.

Viva Decor Closed Their USA Office in 2015. European Offices remain open. 2016.

Inclusions Added to the Paint

Precious Metal Colour gold colored paint, specifically, has larger glitter-like particles while the mica powder has super fine (!) particles.

  • Alone, Pearl-Ex mica powder has a very slight orangish undertone by comparison.
  • Alone, Previous Metal Color is a bit bright and silvery.
  • Combined, the color is amazing and the larger particles of the paint aren’t glaringly evident.

So, I added a decent amount of Pearl Ex mica powder to Viva Decor “Precious Metal Colour.”

Rule: With mica powder, less is more, meaning you start by adding very small amounts and adjust according to your liking. I found my mix pleasing as a 14 karat gold color.

This doctored up Viva Decor “Precious Metal Colour” acrylic/enamel paint was painted in 3 or 4 layers on an already baked Premo polymer clay mix.

The bezels were entirely painted with the paint while the figurative beads only had detail work painted.

Heat-setting

All but one were heat-set at 275°F  for 30 minutes. There was no visual or tactile difference between the baked and unbaked paint.

I couldn’t scratch the paint off with a fingernail once the paint was heat-set. The paint looks the most like real gold. I finally, after years of looking for a rather durable solution, now have a tremendous amount of confidence regarding gold detail work on my beads and pendants.

Although Varathane Gloss sealant is one of the top choices for sealing polymer clay, it’s water-resistant, not waterproof. I’d prefer not to have to seal my beads at all.

Acrylic Paints — Drying Time vs. Cured

Note: There is A difference between drying time in curing time. Drying time might occur within minutes or a few hours for acrylic paints while curing time might take a few days. This difference might help explain some problems with heat-setting acrylic paints a polymer clay.

I say it might help explain some of the problems because, according to Blue Bottle Tree, there was a correlation between painting the paint on raw polymer clay before heat-setting and the paint bubbling. This was dependent upon brand of acrylic paint and/or polymer clay, whether the clay was raw or cured, and other factors. For more information, see that Blue Bottle Tree blog post.

One Minor Problem to Solve

When removing these painted bezels from the glossy tile they were baked on, some of the gold paint stuck to the tile. There was enough paint remaining on the bezels so this wasn’t a problem but I’d would still prefer this not  happen.

Perhaps baking on a silicone mat would improve things.

Micaceous Rock and "Yellow Gold Glitter" Premo Polymer Clay Mix, by Karen A. Scofield. 2016.

Polymer Clay Micaceous Rock Composite Goddess Pendants, by Karen A. Scofield. 2016.

Polymer Clay Micaceous Rock Composite Goddess Goddess Pendants, by Karen A. Scofield. 2016.

Polymer Clay Micaceous Rock Composite Goddess Goddess Pendants, by Karen A. Scofield. 2016.

Micaceous Rock and

Micaceous Rock and “Yellow Gold Glitter” Premo Polymer Clay Mix, by Karen A. Scofield. 2016.

Micaceous Polymer Clay Goddess Pendants, by Karen A. Scofield. 2016.

Micaceous Polymer Clay Goddess Pendants, by Karen A. Scofield. 2016.

Appears more glittery and sparkly in person.

Micaceous rock from family land in South Dakota was crushed and added to “Yelllow Gold Glitter” Premo polymer clay — the stronger polymer clay by Sculpey that’s suitable for making thinner beads like this. (Always wear a mask if working with micaceous rock in this manner to avoid permanent lung disease.)

About 2″ long and 1/4 inch thick. Mica powder patterns, a sun or spirals, were stamped into the raw clay before curing. The sun and spiral symbolism can have significance. E.g. http://www.whats-your-sign.com/spiral-meaning.html. Small bead holes are added after curing (now shown), usually after jewelry design is complete. Design may determine hole placement and number.

The finished beads look very much like some of the micaceous earth in South Dakota. The particular rocks used in making this came from family land right by Medicine Mountain, which is sacred land. So these beads have personal significant meaning for me in at least four ways. They are my creative expression, the rock comes from family land, the rock comes from the vicinity of sacred land upon which I attended a ritual, the rock represents time spent with family, and the symbolism is well chosen, of course.

Medicine Mountain Background:www.flickr.com/photos/sari0009/19354330223/in/dateposted-... There are two Medicine Mountains and only one is in South Dakota. The history and backstory for this particular Medicine Mountain is hard to find, hence my link is offered here.

Interesting Factoid: In some areas of South Dakota, the ground glitters like gold due to the earth and rocks’ micaceous (mica-filled) nature and looks magical.

Unfired Earthenware Ceramic Amohora, by Karen A. Scofield. 2016.

Unfired Ceramic Amphora Bead, by Karen A. Scofield

It’s my first one, it’s hollow and the cap,  which will be permanently chained to the vessel pendant, is removal. It will be glazed;  my daughter thinks a light driftwood or ivory color but I’m thinking something blue. Decorative slip decorations were added and slip was painted over them in multiple layers to avoid separation while retaining the dimensional  image. Once it’s completely fired and glazed, the tip of cap which fits inside the vessel will get a coating of silicone to make it stay put when closed but still allow the vessel to be open and closed. …If the silicone works out.

Unfired Earthenware Ceramic Amphora with Removable Cap, by Karen A. Scofield, 2016

Unfired Earthenware Ceramic Amphora with Removable Cap, by Karen A. Scofield, 2016

Unfired Earthenware Ceramic Amphora with Removable Cap, by Karen A. Scofield, 2016

Unfired Earthenware Ceramic Amphora with Removable Cap, by Karen A. Scofield, 2016

Unfired Earthenware Ceramic Amohora, by Karen A. Scofield. 2016.

Unfired Earthenware Ceramic Amohora, My First, by Karen A. Scofield.. 2016. Will fire to white bisque, will be glazed. First Attempt. 2016.m