Magic-Glos 5-Inclusion UV Resin Faux Opal by Karen A. Scofield

Trial Runs: Transparent Resin Faux Opal Goddess Pendant Using Magic-Glos UV Resin

 And a much better result with a newfound inclusion.

Instagram screen capture of Goddess Pendant resn faux opal shown in different lighting. Karen A. Scofield.

Instagram screen capture of Goddess Pendant resn faux opal shown in different lighting. Karen A. Scofield.

 

Why Trial Runs Using Magic-Glos Resin?

Lisa Pavelka’s Magic-Glos UV Resin allows me to work fast (layers cure in 15 minutes), build a focal bead in layers, and experiment. I’m using this resin to try out some new products, techniques, combinations, and sequences as I learn my preferences in resin faux opal making.

Sure, it’s more expensive per ounce, but ruining a whole batch or three of a dozen or more beads at a time is even more disheartening. If I didn’t allow for a leaning curve like this first, I probably would have given up on resin. It can take months or years to really master the medium. (Things are ridiculously easy in our mind’s eye if our imagination isn’t informed by experience and tried and trusted knowledge base.)

So, here are some of my best results so far, note the slight amber tone at this depth with this resin, and I’m about to Faux Opals in Ice Resin and ArtResin. (See How to Ice Resin, How to ArtResin.) At this thickness, I expect almost no amber tone with Ice Resin and no detectable amber tone with ArtResin.

Magic-Glos Resin Tips

1. Don’t seal paper or cardstock inclusions with Mod Podge or PVC (white craft) glues if you’re using them with Magic-Glos — reactions between water-activated mediums, inks, and Magic-Glos can occur over time.

2. Bubbles can be prevented almost all the time. Read resouces given here. Bubbles can be removed by letting cured item sit one hour, drilling a hole into the bubble, cleaning up drilling debris, adding just enough Magic-Glos, and curing again.

Things Magic-Glos Doesn’t Work Well With

  • PVC glues – your white craft, nearly all decoupage mediums/glues, and school glues are PVC glues — https://thebluebottletree.com/what-is-the-difference-between-mod-podge-and-acrylic-medium
  • Air–dry glues — air-dry glues get trapped under things, don’t cure 100%, then release air bubbles into your curing resin. Use two-part epoxy glue instead!
  • Ice Resin, whether or not each resin is cured or wet (insured) — chemical reaction between the two resins causes cloudiness
  • Water-based sealants – any sealants that are not waterproof after drying (water resistant is not waterproof)
  • Alcohol inks
  • Unsealed inkjet prints
  • Anything that may run or bleed if wet
  • Sharpie markers

If in doubt, test first, often weeks ahead to make doubly sure.

Baking Magic-Glos

Don’t. Don’t bake Magic-Glos. Avoid temperatures over 100 degrees F. See MSDS.

Warning: Baking Magic-Glos with polymer clay will cause the resin to amber (brown). See MSDS sheet (link given above) for further info.

Magic-Glos Layers

Doming, Pulling Away, and Self-Leveling Properties and What They Mean to the User — The same properties that allow Magic-Glos to dome causes the resin to pull away from edges/periphery in first layer or two, hence a good dome is built up in layers, each of which are cured before the next is added. The last layers are minimal amounts and it may help to spread the resin nearly to the edge (with a toothpick or small ballpoint stylus) and then let Magic-Glos self-leveling finish the job, finally fully covering evenly and doming. Let it sit 10 minutes to 1/2 hour out of UV light to let it finish self-leveling and to let air bubbles make themselves evident. The self-leveling properties mean that you might think you only added enough, the self-doming is a bit of a delayed reaction, and then suddenly you have Magic-Glos running over the sides. If still uncured, it can be cleaned up with cotton swabs and wet wipes but prevention is better than damage control. Prevention involves adding thinner, multiple layers that are each cured before the next is added and curing your item while on a pedestal — a bit of polymer clay or poster-tx on a craft mirror a bit larger than your piece but small enough to fit in the UV lamp oven.

If the overfill cured, it can be pried off with your hands and/or chipped off with a craft knife.

Minimum Number Of Layers — usually 2 layers, less is more, meaning it’s better to add thin/incomplete layers than to overfill. Thinner layers allows the air bubble popping method of passing a butane mini torch or windproof lighter over the surface of the Magic-Glos for one and only one second.

Karen A. Scofield On “What Makes Me Tick”

Levo App

My Results From the Levo app regarding thinking talents.

image

As you can see, it picks up on my autism-related deficiencies/differences/advantages. My relational quadrant is empty (not in real life), but then the underlying social constructs de rigueur these days overwhelmingly favor charming extroverts, the more gregarious a la neurotypical fashion they are the better. I see it offers are some pointers about things “relational” but ultimately for someone like me, this test may not pick up on social and communication alternatives. Here’s a TED talk that challenges Introverts with a capital “I” being placed at the top of whatever  constructs we can devise without more penetrating examination.

Rethinking Introverts

http://m.huffpost.com/us/entry/3794733

http://www.lifehack.org/articles/communication/top-10-advantages-of-introvert.htmlimage

  • I tend to do my best thinking alone. That is core the body of any Venn diagram about myself).
  • I don’t do well with snap decisions, often go through a vigorous fact checking process, may research a topic north south east and west, and need time to think through pros and cons.
  • I prefer advanced notice about events or needed decisions.
  • I need a good amount of alone time to do my best thinking, stay true to myself, and stay on track.
  • As much as possible, I need to let people know I will get back to them on the topic or decision rather than keep them hanging.

What do I need to work on: I need to devise purposely nurture relationships with “big thinkers.” Spending time with them will nourish and inspire my thinking processes.

Since my relational skills are peculiar or lacking, I do best with other like people, meaning they are rather direct communicators who are or do well with those on the autism range.

imageimageimageimageimageimageimageimageimageimageimage

One Conclusion

It seems I should partner with someone who excels in people, feeling skills and bringing things to action. That sounds like a neurotypical rather than someone who is on the autism range too. Neurotypicals usually shun people like me with a vengeance. What to do? I don’t want a relationship of unequals, so rather than some sort of setup that involves being mentored, I probably would do best in a co-mentoring relationship in which each recognizes the strengths and weaknesses of themselves and each other, without the ego trips or superiority complexes and other such baggage. Ideally. If I can’t get that, I can at least use a certified accountant and other specialists to help me get an art career off the ground.

Keeping the above in mind, the below from my about me page may make more sense!

I design and make figurative bead or art dolls, whip together spirit dolls, art journal, do fine art paintings, create mixed media mosaics, and get into some fabric arts!

My blog pages reflect my intense, playful nature that leads me to intermittently research art mediums/techniques N, S, E, W, and outside the box for years on end so that I can readily dip my hands into multiple art mediums and play, sometimes exactingly and sometimes experimentally. To the core, it’s my nature to take things art further and I have no qualms about expanding and correcting my pages as new products or information comes along. Making art stirs up a deep-seated sense of awe, a child’s sense of wonder, a well-seasoned intellectual curiosity, and the sense that creation is a spiritual experience. Ideas for art constantly fly into my head and I keep notes. Days are never long enough.

A little background... Some of my polymer clay beads appear in the book Polymer Artists Showcase, by tejae floyde. My 1st two art dolls were in Kenosha Wisconsin’s Lemon Street Art Gallery, where I was a member from 2005 to 2007. Lovely place. (I had no idea I could sculpt until I was in my mid to late 40s. It turns out that my dominant dominant intelligence is spatial, helpful in more 3D arts.)

Eclectic Focus

Sculpting figurative beads of polymer or earthenware ceramic clay, resin, making my own prototypes and molds, art dolls, spirit dolls, mixed media mosaics, art journaling, water-based painting, and bouts of fabric arts (cotton, Kraft-tex, paper cloth AKA fabric paper).

Communication Style

I’m socially awkward (autistic) and do best with kind but exquisitely forward people who don’t infer or beat around the bush so if you talk with me, just say what you mean/feel yet remain respectful. (Hint: I love pluralism, eclecticism, constructive criticism and civil rights. I’m incredibly tolerant up to the point of intolerance, brainwashing, purposefully burdensome learned helplessness/ignorance, and other stupid toxic people tricks.)

Watermedia Warning: I’m an unabashed Cretacolor, Liquitex, Golden, and Da vinci fluid acrylics fan.

FAVORITES

Favorite Clays:

Ceramic — Earthenware, Raku
Polymer Clay — Cernit, Fimo Doll/Professional, Kato, Pardo, Premo, Sculpey UltraLight for under structures/armature
Air Dry Clay — La doll Premier, Creative PaperClay, Professional Cold Porcelain
Apoxie Sculpt

Favorite Artist Paints:

Winsor & Newton Watercolors
Golden Acrylics — Fluid Acrylics, Heavy Body
Da Vinci Fluid Acrylics
Liquitex — Soft Body, Heavy Body, Spray can), Basics

Favorite Acrylic Craft Paints (Art Journaling):

Delta Ceramcoat
Jo Sonja
SoHo

Favorite Watermedia Pencils and Water-Soluble Oil Pastels, in Order of Preference:

Cretacolor (artist grade) — AquaMonoliths, AquaStics, AquaBricks
Albrecht Dürer Watercolor Pencils
Caran d’Ache Neocolor II Artists’ Crayons (not as lightfast as Cretacolor, across the board)
Inktense Pencils (the more lightfast shades)

Note: In any fine art, I only use water-soluble oil products on top of acrylics or watercolors, for final finishing touches, if I use them at all.

Favorite Opaque Markers and Pens for Art Journaling:

Uni Posca Paint Pens (remain water-soluble — judiciously seal with 3 layers spray sealant)
Sakura Gelly Roll Pens (no sealant
100% Satisfaction Guaranteed
Sakura Pigma Micron Pens (permanent, can watercolor and paint over them!)

Favorite Sketching Pencils and Powders:

Cretacolor — Artist sketching pastel pencils, carre hard pastels, sketching leads and holders, sketching powders.
Pitt Pastel pencils
Prismscolor sketching pencils
Unison Soft Pastel Red Earth 10

Favorite Papers:

Canson, Strathmore 400 or 500 series, Canva-Paper, Stonehenge, Fabriano Soft Watercolor Paper, Yupo

Favorite Art Board:

Ampersand (especially their Aquabord)
Fredix Archival Watercolor panels

Favorite Illustration Boards:

Stathmore
Crescent

Favorite Canvas:

Fredrix — Watercolor Canvas and their canvas for acrylics

Favorite Canvas Pads:

Fredrix — Regular and Watercolor
Canva-Paper
Strathmore Acrylic

Favorite Mixed Media Pads:

Canson XL Mix Media (for art journaling)
Stathmore 400 or 500

Favorite Gesso:

Liquitex (not Basics!)
Golden
Winsor & Newton
Martin F. Weber Prima (art journaling and DIY art boards, has a lovely matte eggshell smooth texture)

Favorite Fixatives:

Krylon — Matte Finish, Workable Fixatif, or UV Resistant Clear Matte
Lascaux UV Protect 2 or 3
Blair Very Low Odor Spray Fix
Plaid Patricia Nimrocks Clear Acrylic Sealer Matte (for crafts only)

Favorite Colored Pencils:

I can’t afford those! Nevermind. Sigh.

I did unwittingly get Prismacolor pencils from after their factories moved to Mexico and too many leads fall out of the pencils or break. Grrr.

I’m not so much in love with colored pencils, presently.

Favorite Fabrics:

Quilting cottons
Kraft-tex

Favorite Thread:

Carpet thread
Strong quality cotton threads
Silky threads

Favorite Languages:

English, Estonian, French, German, Swedish, Dutch, Norwegian, Punjabi, Spanish, and Italian.

Favorite Cuisines in Order of General Preference:

Punjabi, Chinese, Mexican, Greek, Estonian, French, American.

Note that all my work is copyrighted and you may not use it without explicit written permission.

Micaceous Rock and "Yellow Gold Glitter" Premo Polymer Clay Mix, by Karen A. Scofield. 2016.

Polymer Clay Micaceous Rock Composite Goddess Pendants, by Karen A. Scofield. 2016.

Polymer Clay Micaceous Rock Composite Goddess Goddess Pendants, by Karen A. Scofield. 2016.

Polymer Clay Micaceous Rock Composite Goddess Goddess Pendants, by Karen A. Scofield. 2016.

Micaceous Rock and

Micaceous Rock and “Yellow Gold Glitter” Premo Polymer Clay Mix, by Karen A. Scofield. 2016.

Micaceous Polymer Clay Goddess Pendants, by Karen A. Scofield. 2016.

Micaceous Polymer Clay Goddess Pendants, by Karen A. Scofield. 2016.

Appears more glittery and sparkly in person.

Micaceous rock from family land in South Dakota was crushed and added to “Yelllow Gold Glitter” Premo polymer clay — the stronger polymer clay by Sculpey that’s suitable for making thinner beads like this. (Always wear a mask if working with micaceous rock in this manner to avoid permanent lung disease.)

About 2″ long and 1/4 inch thick. Mica powder patterns, a sun or spirals, were stamped into the raw clay before curing. The sun and spiral symbolism can have significance. E.g. http://www.whats-your-sign.com/spiral-meaning.html. Small bead holes are added after curing (now shown), usually after jewelry design is complete. Design may determine hole placement and number.

The finished beads look very much like some of the micaceous earth in South Dakota. The particular rocks used in making this came from family land right by Medicine Mountain, which is sacred land. So these beads have personal significant meaning for me in at least four ways. They are my creative expression, the rock comes from family land, the rock comes from the vicinity of sacred land upon which I attended a ritual, the rock represents time spent with family, and the symbolism is well chosen, of course.

Medicine Mountain Background:www.flickr.com/photos/sari0009/19354330223/in/dateposted-... There are two Medicine Mountains and only one is in South Dakota. The history and backstory for this particular Medicine Mountain is hard to find, hence my link is offered here.

Interesting Factoid: In some areas of South Dakota, the ground glitters like gold due to the earth and rocks’ micaceous (mica-filled) nature and looks magical.

Earthenware clay figurative pendants, by Karen A. Scofield

Ceramic Clay Dare: I Sculpt a Goddess Pendant on Camera

I sculpted with polymer clay before and, in ceramic clay, I sculpted the backside of a bead without a mold. Now I have dared myself to sculpt an entire bead without the use of any of my molds ( I molded my own beads)in earthenware clay, a medium still very new to me. So I did this on camera.

I’ll get better at filming. And sculpting. But for now, at least I know I can do this and I feel a lot better about doing 20, 50, or more figurative pendants like this, in different sizes and styles of course.

The Finished Pendant (Standing)

Earthenware clay figurative pendants, by Karen A. Scofield

Earthenware clay figurative pendants, by Karen A. Scofield

Earthenware clay figurative pendants, by Karen A. Scofield

Earthenware clay figurative pendants, by Karen A. Scofield

Earthenware Greenware Handmade Ceramic Goddess Pendant, by Karen A. Scofield

The Evolution of Karen’s Beads

Shorter Video

Longer Video

Good news! I have found out I can fire and glaze my beads locally. Probably do this in batches of a dozen each. Here is one that has finished drying and is ready for bisque firing.

image

Earthenware Greenware Handmade Ceramic Goddess Pendant, by Karen A. Scofield

Why Goddess Pendants or Focal Beads?


Before there were pussy hats, there were Goddess pendants. After pussy hats, there will still be Goddess pendants. 

Earthenware Greenware Handmade Ceramic Goddess Pendant, by Karen A. Scofield

Earthenware Greenware Handmade Ceramic Goddess Pendant, by Karen A. Scofield. 2016.

Why Goddess Pendants? To better answer that, we have to understand the many reasons we make any human figurative art or study female/Goddess figures throughout human history. See http://suppressedhistories.net/

In some languages, the word for history also means storyhttps://en.wikipedia.org/wiki/History

Micaceous Rock and "Yellow Gold Glitter" Premo Polymer Clay Mix, by Karen A. Scofield. 2016.

Micaceous Rock and “Yellow Gold Glitter” Premo Polymer Clay Mix, by Karen A. Scofield. 2016.

Through my beads, I’m telling my story — I’m a woman, domestic abuse survivor, an artist, I’m on the autism spectrum, and my Goddess pendants help tell my story in the contexts of an interest in equality, as opposed to abuse and sexism.  My beads are about equality and power — it’s abuse vs. equality. Women’s rights and Goddess stuff are considered too minority interest, too fringe despite the fact that half the world is female, and that’s a problem. Goddess/female figures may even be banned or get demonized.

Handmade Goddess Pendants, by Karen A. Scofield

Handmade Goddess Pendants, by Karen A. Scofield

Example 1: I had drawn renditions of the Venus of Willendorf, a world famous archaeological find, on shrink plastic and made pendants of them. fThese shrink plastic beads were banned on Myspace as obscene. Here’s what they looked like.

A Shrink Plastic Representation of the World Famous Venus of Willendorf, by Karen A. Scofield
Example 2: I wore a Goddess necklace to Walmart. The cashier suggested I could make money selling them as rather, tee-hee, lewd little party favors at bachelor or bachelorette parties. She had absolutely no inkling that she shouldn’t simply sexualize and peg them in such a narrow, restrictive manner, as opposed to all that the Goddess concept can potentially encompass on a daily basis. Equality touches all all aspects of life, and this shouldn’t be marginalized, pegged as a lewd/lesbian thing, or treated as a fringe topic. Anyway, my Goddess pendant was profane image to her, but to those that wear them, Goddess art and pendants are more of a spiritual and intellectual thing and, more specifically, symbolize spiritual and social equality. They embody, invoke, and evoke this.

As an artist, I cultivate messages and images that are needed, rather than what people are conditioned to lap up from the pundits, pulpits, and consumerism. It concerns me that the world is full of “sanitized,” corporate-made, mainstream images and messages about women and their bodies, messages that are loaded with sexism both overt and/or insidious.

The pussy hat phenomenon shows us that feminine symbols of equality ARE needed. There is the desire to create our world pluralistically without the reality filters of sexism, cultural triumphalism, racism, or creedism (religious prejudice). I desire more autonomous and honest dialog and equality, and I hope you do too.

We still live in a world in which women often don’t get paid the same amount for doing the same job no matter how well they do it, or even if they do it better. As a US citizen, I live in a country in which a considerable majority of art gallery artists are male. It’s a country in which women’s art generally sells for only a small fraction of the profit that art made by men can fetch. We live in a world in which the majority of religion is really male-centric and male-dominated. We live in a world in which men’s voices are given more weight and are heard more. It’s not Goddess, it’s God with no room for any female divine. Instead, we still have the Madonna-Whore Complex. The feminine divine either is falsely demonized, socially/theologically outlawed (or banned), or turned into a whore.

Anti-intellectual, male dominated paradigms hold feminine equality at odds with more formative power structures, be they economic, religious, artistic, or what have you. How is sexism considered to be the fabric of society? And what does that have to do with domestic violence anyway?

See “The Ascent of Woman”http://www.bbc.co.uk/programmes/b0693dsh

Domestic Abuse and the Metaparadigm (Mother World View) of Abuse/War

the most reliable indicator of whether or not there is violence inside a country, or whether it will use military violence against another country, is not poverty or access to natural resources or religion or even degree of democracy. It’s violence against females.” — from “Gloria Steinem’s new show links global instability to violence against women: “For the first time there are fewer females on earth than males

The Power and Control (Abuse) and Equality (Nonviolence) wheels, what they mean, what they look like in current events or everyday situations are sadly only usually discussed, shown, or used during domestic abuse prevention/recovery. They are, in fact, paradigmatic and are applicable on a personal, local, national, and global scale. Here’s what goes on with the Power and Control (Abuse) paradigm.

Methods of abusive power and control have been and continue to be used as social, legal, religious, and financial weapons and they often result in violence, be it domestic or wartime violence. The Power and Control wheel/paradigm is diametrically opposed to Equality because it relies on abusive imbalances of power. This is true whether they pretend to protect us and have our best interests in mind or whether they lay bare their prejudices, sexism, and ambitions.  It takes power and rights away from others in order to feel powerful and it’s a massive failure of imagination.

Here’s a page from my art journal on the Equality (nonviolence) power wheel. Notice the notes on imagination.

image

Art Journal. Equality. Power. Tools of Change.

Art is the Antidote

How is it that society today hasn’t quit its addiction to prejudice, bigotry, sexism and the like? I don’t pretend to understand all that and I hope I never do. I can imagine many other paths to power. I can imagine sharing it. And as a woman and an artist, I shape a more inclusive world in clay, canvas, paper, fiber, cloth, and words. Art is an antidote. Symbols matter. Symbols are powerful and my art beads are ones I can bring into all sorts of every day settings.

Raised Scratch Foam Designs in Polymer Clay

Raised Scratch Foam Polymer Clay Designs

Raised Scratch Foam Designs in Polymer Clay

Raised Scratch Foam Polymer Clay Design Test, with notes, by Karen A. Scofield

KarenAScofield Spriograph Clay Texture SheetsNote: This page will be updated as examples are made.

The above picture is only a simple and fast test. It’s not meant to be a prime example, just an example to get your creative juices flowing (and mine). It shows a moon shaped piece of clay with a raised scratch foam design that was colored with Pearl Ex.

I haven’t yet seen others doing it, but yes indeedy, spirographs can be used on scratch foam (Inovart Presto Foam Printing Plate was used in this case) with a ball point pen, ball stylus, or Sakura Gel Pen.

Back at it, Dec. 2016.

KarenAScofield Spriograph Clay Texture Sheets

spirograph clay texture sheet by Karen a Scofield

The Basic Idea

Create a design on scratch foam with a spirograph set and a ball point pen. Press  polymer clay into the design and lift. Add bead holes, etc. You’re looking for spirograph sets that won’t make unintended scratches on the scratch foam. Mine came with “The Spiral Draw” Book.

Taking it Further

Pointillism elements or entire designs be be added inside or around the spirograph design with a ball point pen or ball stylus. The result creates raised clay designs once clay is preseed into it.

Ball point styluses that come in varying sizes can be used for added interest and then needles or beed hole makers can be dragged across the surface, at a slant, to add on to the design too.

Scratch foam designs are probably more commonly used for printing monoprints and other techniques … and also by metal clay artists. They can be earthy/rustic looking or linear and crisp ones.

One can create a bezel complete with boarder designs, with scratch foam designs. What you indent on the foam will be raised on the clay. If you add dimensional writer designs to the scratch foam ones, the clay pressed into it will have both raised and indented designs.

If you use Sakura Gel Pens for the spirograph scratch foam deisgns, many of their inks are oqaque and therefore show up on darker clays. You can press the clay into the fresh scratch foam design and then bake. You may want to seal your design afterward.

Any manner of polymer clay extrusions, applique, relief sculpture, lace impressions/molds, designs for faux enamels, crackling, or designs made with cutters/blades can be applied over the spirograph textured clay passages. If you’re worried about pressing clay together to cause adhesion, because you don’t want to ruin more delicate designs, you may want to use liquid clay or Bake and Bond for adhesion purposes.

With single layer or multi layered scratch foam designs, you create mixed media mosaic tiles, embellishments, beads, and larger clay sheets. You can create molds of the larger clay sheets if you want.

Raised designs can be colored with paint, Sakura Gel Pen ink, inks, or Pearl Ex powders (which are a brand of mica powder). I’d apply paint to baked clay but Sakura Gel Pen, Pearl Ex, and alcohol inks can be applied to raw clay that’s then baked.

You may want to seal baked polymer clay items that have Pearl Ex mica powders or Gel Pens baked onto them. Varathane Water Based varnish is a wonderful sealant for polymer clay pieces.