Magic-Glos 5-Inclusion UV Resin Faux Opal by Karen A. Scofield

Trial Runs: Transparent Resin Faux Opal Goddess Pendant Using Magic-Glos UV Resin

Why Trial Runs Using Magic-Glos Resin?

Lisa Pavelka’s Magic-Glos UV Resin allows me to work fast (layers cure in 15 minutes), build a focal bead in layers, and experiment. I’m using this resin to try out some new products, techniques, combinations, and sequences as I learn my preferences in resin faux opal making.

Sure, it’s more expensive per ounce, but ruining a whole batch or three of a dozen or more beads at a time is even more disheartening. If I didn’t allow for a leaning curve like this first, I probably would have given up on resin. It can take months or years to really master the medium. (Things are ridiculously easy in our mind’s eye if our imagination isn’t informed by experience and tried and trusted knowledge base.)

So, here are some of my best results so far, note the slight amber tone at this depth with this resin, and I’m about to Faux Opals in Ice Resin and ArtResin. (See How to Ice Resin, How to ArtResin.) At this thickness, I expect almost no amber tone with Ice Resin and no detectable amber tone with ArtResin.

UV Resin Faux Opal by Karen A Scofield 2017

UV Resin Faux Opal by Karen A Scofield 2017

Magic-Glos Resin Tips

1. Don’t seal paper or cardstock inclusions with Mod Podge or PVC (white craft) glues if you’re using them with Magic-Glos — reactions between water-activated mediums, inks, and Magic-Glos can occur over time.

2. Bubbles can be prevented almost all the time. Read resouces given here. Bubbles can be removed by letting cured item sit one hour, drilling a hole into the bubble, cleaning up drilling debris, adding just enough Magic-Glos, and curing again.

Things Magic-Glos Doesn’t Work Well With

  • PVC glues – your white craft, nearly all decoupage mediums/glues, and school glues are PVC glues — https://thebluebottletree.com/what-is-the-difference-between-mod-podge-and-acrylic-medium
  • Air–dry glues — air-dry glues get trapped under things, don’t cure 100%, then release air bubbles into your curing resin. Use two-part epoxy glue instead!
  • Ice Resin, whether or not each resin is cured or wet (insured) — chemical reaction between the two resins causes cloudiness
  • Water-based sealants – any sealants that are not waterproof after drying (water resistant is not waterproof)
  • Alcohol inks
  • Unsealed inkjet prints
  • Anything that may run or bleed if wet
  • Sharpie markers

If in doubt, test first, often weeks ahead to make doubly sure.

Baking Magic-Glos

Don’t. Don’t bake Magic-Glos. Avoid temperatures over 100 degrees F. See MSDS.

Warning: Baking Magic-Glos with polymer clay will cause the resin to amber (brown). See MSDS sheet (link given above) for further info.

Magic-Glos Layers

Doming, Pulling Away, and Self-Leveling Properties and What They Mean to the User — The same properties that allow Magic-Glos to dome causes the resin to pull away from edges/periphery in first layer or two, hence a good dome is built up in layers, each of which are cured before the next is added. The last layers are minimal amounts and it may help to spread the resin nearly to the edge (with a toothpick or small ballpoint stylus) and then let Magic-Glos self-leveling finish the job, finally fully covering evenly and doming. Let it sit 10 minutes to 1/2 hour out of UV light to let it finish self-leveling and to let air bubbles make themselves evident. The self-leveling properties mean that you might think you only added enough, the self-doming is a bit of a delayed reaction, and then suddenly you have Magic-Glos running over the sides. If still uncured, it can be cleaned up with cotton swabs and wet wipes but prevention is better than damage control. Prevention involves adding thinner, multiple layers that are each cured before the next is added and curing your item while on a pedestal — a bit of polymer clay or poster-tx on a craft mirror a bit larger than your piece but small enough to fit in the UV lamp oven.

If the overfill cured, it can be pried off with your hands and/or chipped off with a craft knife.

Minimum Number Of Layers — usually 2 layers, less is more, meaning it’s better to add thin/incomplete layers than to overfill. Thinner layers allows the air bubble popping method of passing a butane mini torch or windproof lighter over the surface of the Magic-Glos for one and only one second.

The Fine Art Air-Dry and Polymer Clay Market Can Be Confusing for the Beginner to Intermediate Artist

What this page is and isn’t about — It’s about fine art air-dry and polymer clays. It’s not about ceramic, cold porcelain, resin clay, epoxy clays, or any kiln-cured products.

This page was written after reading https://www.reviewstream.com/reviews/?p=155083#thoughts-box, which was about Premier clay, which is an artist grade air-dry clay, and the beginner’s needs and understandable confusion.

For jewelry making, Premo!, Fimo Classic, Kato, and Cernit are some of your better choices of oven-cured polymer clays –they’re durable enough and do not have to be sealed unless certain surface treatments (mica powders like Pearl Ex or Perfect Pearls…) require it. See: https://thebluebottletree.com/seal-polymer-clay/

Durability… While people making charms often use various air-dry clays, they usually don’t construct bracelets or rings out of air-dry clays. Jewelry may take much more wear and tear.

Seal it or not? As a rule, air-dry clays generally have to be sealed once dry and finished but oven-cured polymer clays don’t. (Two-part epoxy clays don’t have to be sealed but although they’re often called air-dry, they actually cure by chemical reaction and may even be able to cure under water. They’re not true air-dry clays.)

Cracks in Premier clay.… Cracks don’t mean your air-dry clay is weak. Premier is one of the strongest air-dry clays. Nearly all air-dry clays have some shrinkage and Premier is no exception, although it shrinks less than some air-dry clays. Having a good armature, if armature is necessary, and using minimal amounts of water while sculpting with Premier can decrease the likelihood or severity of cracks. Sometimes cracks happen but they’re easily be repaired with Premier, even if your item dried. See the below video. Cracks may occur if you added too much water while sculpting, used a cardboard armature, used thin clay over a rigid armature (Ostrich legs, for example), let your item dry too quickly, or didn’t support sculpture parts subject to gravity. Don’t dry your Premier clay items under a fan, for example. Do remember to keep unused clay in an air-tight bag and/or container.

For figurative works, Premix, an air-dry clay made by the same company as Premier, is easier to sculpt and blend than Premier. Doll artist Hannie Sarris loved Premix clay. Premier clay may take some different sculpting techniques than what one would be used to with polymer clay and one uses minimal (!) amounts of water are used while sculpting Premier. People working with these air-dry clays might lightly dab their fingers across a wet sponge to keep clay moist enough while sculpting. They may use a mister type of water bottle. Do not use Sculpey Clay Softener or any type of oil to soften, smooth, and blend these air-dry clays — they are hybrid clays and have their own characteristics, sculpting techniques, storage and compatibility considerations. They’re not like the majority of polymer clays that are oven-cured (e.g., Fimo Classic, Fimo Soft, Cernit, Fimo Doll, Premo!). They’re not like most air-dry clays on the market. They are used by a number of very famous art doll artists and others.

So yes, there are indeed air-dry polymer clays — Activa Lumina Translucent Polymer Clay, Staedtler Fimo Air Basic Modeling Clay, and Activa LaDoll Premier clay are examples of air-dry polymer clays. Activa, the company that makes laDoll Premier clay, describes Premier clay as a type of polymer clay on their site. Lumina has long been known to the polymer clay community. Fimo Air Basic is weaker than either of those.

Polymer clays have their own issues — Dirt, lint, hair, compatibility issues, and baking considerations (always monitor your oven with two oven thermometers, not counting the oven’s own temperature reading). If you look at it that way, a few easily repaired cracks in Premier clay items isn’ts a bad deal.

Sculpey Diluent, AKA liquid Sculpey Clay Softener, works with oven-cured polymer clays, specifically, and not with air-dry polymer clays. Here’s the Sculpey Clay Softener Material Safety Data Sheet: https://www.sculpey.com/wp-content/uploads/2015/12/Clay-Softener-SDS-10282015.pdf

In contrast, Makin’s, Hearty, Das, “cold porcelain” clays, Creative Paperclay, Celluclay, and epoxy putties are not polymer clays no matter who describes them as such.

For a whole lot of information on all things polymer and air-dry clay, see:

…Or go to clay manufacturers’ sites and hit their FAQs and MSDS pages. I wish there were sculpting, storage, compatibility, MSDS and other information (to seal or not to seal) with each clay package that one takes home, but that’s sadly not the case.

My Latest Faux Opal Using lMagic-Glos UV Resin, by Karen A. Scofield. March 2, 2017.

My Latest Resin Faux Opal

Resin Faux Opal by Karen A. Scofield. March 2, 2017. Magic-Glos, a UV-curing redin, and various inclusions were used and the gem was built up in layers.

Materials Used (Not a Complete List):

  • Lisa Pavelka Magic-Glos Resin
  • Lisa Pavelka UV Lamp Oven thingie
  • Various Glitters
My Latest Faux Opal Using lMagic-Glos UV Resin, by Karen A. Scofield. March 2, 2017.

My Latest Faux Opal Using lMagic-Glos UV Resin, by Karen A. Scofield. March 2, 2017.

Karen A. Scofield On “What Makes Me Tick”

Levo App

My Results From the Levo app regarding thinking talents.

image

As you can see, it picks up on my autism-related deficiencies/differences/advantages. My relational quadrant is empty (not in real life), but then the underlying social constructs de rigueur these days overwhelmingly favor charming extroverts, the more gregarious a la neurotypical fashion they are the better. I see it offers are some pointers about things “relational” but ultimately for someone like me, this test may not pick up on social and communication alternatives. Here’s a TED talk that challenges Introverts with a capital “I” being placed at the top of whatever  constructs we can devise without more penetrating examination.

Rethinking Introverts

http://m.huffpost.com/us/entry/3794733

http://www.lifehack.org/articles/communication/top-10-advantages-of-introvert.htmlimage

  • I tend to do my best thinking alone. That is core the body of any Venn diagram about myself).
  • I don’t do well with snap decisions, often go through a vigorous fact checking process, may research a topic north south east and west, and need time to think through pros and cons.
  • I prefer advanced notice about events or needed decisions.
  • I need a good amount of alone time to do my best thinking, stay true to myself, and stay on track.
  • As much as possible, I need to let people know I will get back to them on the topic or decision rather than keep them hanging.

What do I need to work on: I need to devise purposely nurture relationships with “big thinkers.” Spending time with them will nourish and inspire my thinking processes.

Since my relational skills are peculiar or lacking, I do best with other like people, meaning they are rather direct communicators who are or do well with those on the autism range.

imageimageimageimageimageimageimageimageimageimageimage

One Conclusion

It seems I should partner with someone who excels in people, feeling skills and bringing things to action. That sounds like a neurotypical rather than someone who is on the autism range too. Neurotypicals usually shun people like me with a vengeance. What to do? I don’t want a relationship of unequals, so rather than some sort of setup that involves being mentored, I probably would do best in a co-mentoring relationship in which each recognizes the strengths and weaknesses of themselves and each other, without the ego trips or superiority complexes and other such baggage. Ideally. If I can’t get that, I can at least use a certified accountant and other specialists to help me get an art career off the ground.

Keeping the above in mind, the below from my about me page may make more sense!

I design and make figurative bead or art dolls, whip together spirit dolls, art journal, do fine art paintings, create mixed media mosaics, and get into some fabric arts!

My blog pages reflect my intense, playful nature that leads me to intermittently research art mediums/techniques N, S, E, W, and outside the box for years on end so that I can readily dip my hands into multiple art mediums and play, sometimes exactingly and sometimes experimentally. To the core, it’s my nature to take things art further and I have no qualms about expanding and correcting my pages as new products or information comes along. Making art stirs up a deep-seated sense of awe, a child’s sense of wonder, a well-seasoned intellectual curiosity, and the sense that creation is a spiritual experience. Ideas for art constantly fly into my head and I keep notes. Days are never long enough.

A little background... Some of my polymer clay beads appear in the book Polymer Artists Showcase, by tejae floyde. My 1st two art dolls were in Kenosha Wisconsin’s Lemon Street Art Gallery, where I was a member from 2005 to 2007. Lovely place. (I had no idea I could sculpt until I was in my mid to late 40s. It turns out that my dominant dominant intelligence is spatial, helpful in more 3D arts.)

Eclectic Focus

Sculpting figurative beads of polymer or earthenware ceramic clay, resin, making my own prototypes and molds, art dolls, spirit dolls, mixed media mosaics, art journaling, water-based painting, and bouts of fabric arts (cotton, Kraft-tex, paper cloth AKA fabric paper).

Communication Style

I’m socially awkward (autistic) and do best with kind but exquisitely forward people who don’t infer or beat around the bush so if you talk with me, just say what you mean/feel yet remain respectful. (Hint: I love pluralism, eclecticism, constructive criticism and civil rights. I’m incredibly tolerant up to the point of intolerance, brainwashing, purposefully burdensome learned helplessness/ignorance, and other stupid toxic people tricks.)

Watermedia Warning: I’m an unabashed Cretacolor, Liquitex, Golden, and Da vinci fluid acrylics fan.

FAVORITES

Favorite Clays:

Ceramic — Earthenware, Raku
Polymer Clay — Cernit, Fimo Doll/Professional, Kato, Pardo, Premo, Sculpey UltraLight for under structures/armature
Air Dry Clay — La doll Premier, Creative PaperClay, Professional Cold Porcelain
Apoxie Sculpt

Favorite Artist Paints:

Winsor & Newton Watercolors
Golden Acrylics — Fluid Acrylics, Heavy Body
Da Vinci Fluid Acrylics
Liquitex — Soft Body, Heavy Body, Spray can), Basics

Favorite Acrylic Craft Paints (Art Journaling):

Delta Ceramcoat
Jo Sonja
SoHo

Favorite Watermedia Pencils and Water-Soluble Oil Pastels, in Order of Preference:

Cretacolor (artist grade) — AquaMonoliths, AquaStics, AquaBricks
Albrecht Dürer Watercolor Pencils
Caran d’Ache Neocolor II Artists’ Crayons (not as lightfast as Cretacolor, across the board)
Inktense Pencils (the more lightfast shades)

Note: In any fine art, I only use water-soluble oil products on top of acrylics or watercolors, for final finishing touches, if I use them at all.

Favorite Opaque Markers and Pens for Art Journaling:

Uni Posca Paint Pens (remain water-soluble — judiciously seal with 3 layers spray sealant)
Sakura Gelly Roll Pens (no sealant
100% Satisfaction Guaranteed
Sakura Pigma Micron Pens (permanent, can watercolor and paint over them!)

Favorite Sketching Pencils and Powders:

Cretacolor — Artist sketching pastel pencils, carre hard pastels, sketching leads and holders, sketching powders.
Pitt Pastel pencils
Prismscolor sketching pencils
Unison Soft Pastel Red Earth 10

Favorite Papers:

Canson, Strathmore 400 or 500 series, Canva-Paper, Stonehenge, Fabriano Soft Watercolor Paper, Yupo

Favorite Art Board:

Ampersand (especially their Aquabord)
Fredix Archival Watercolor panels

Favorite Illustration Boards:

Stathmore
Crescent

Favorite Canvas:

Fredrix — Watercolor Canvas and their canvas for acrylics

Favorite Canvas Pads:

Fredrix — Regular and Watercolor
Canva-Paper
Strathmore Acrylic

Favorite Mixed Media Pads:

Canson XL Mix Media (for art journaling)
Stathmore 400 or 500

Favorite Gesso:

Liquitex (not Basics!)
Golden
Winsor & Newton
Martin F. Weber Prima (art journaling and DIY art boards, has a lovely matte eggshell smooth texture)

Favorite Fixatives:

Krylon — Matte Finish, Workable Fixatif, or UV Resistant Clear Matte
Lascaux UV Protect 2 or 3
Blair Very Low Odor Spray Fix
Plaid Patricia Nimrocks Clear Acrylic Sealer Matte (for crafts only)

Favorite Colored Pencils:

I can’t afford those! Nevermind. Sigh.

I did unwittingly get Prismacolor pencils from after their factories moved to Mexico and too many leads fall out of the pencils or break. Grrr.

I’m not so much in love with colored pencils, presently.

Favorite Fabrics:

Quilting cottons
Kraft-tex

Favorite Thread:

Carpet thread
Strong quality cotton threads
Silky threads

Favorite Languages:

English, Estonian, French, German, Swedish, Dutch, Norwegian, Punjabi, Spanish, and Italian.

Favorite Cuisines in Order of General Preference:

Punjabi, Chinese, Mexican, Greek, Estonian, French, American.

Note that all my work is copyrighted and you may not use it without explicit written permission.

Viva Decor Precious Metal Colour Paint in Gold Was Heat-set on Cured Premo Polymer Clay, by Karen A. Scofield

Viva Decor Precious Metal Colour Heat-Set on Premo Polymer Clay

The Clay

I added crushed, shiny micaceous (meaning it’s loaded with mica) rock, fine gold glitter, and Blank Slate Gold and Silver Flake Mix, in order of volume, to some Premo! polymer clay (a Sculpey product). That’s why it’s sparkly and can appear darker or very light depending on how the light shines on it and it moves, you see sparkles as well as flashes and glints.

Aside: The Backstory on the Micaceous Rockhttps://www.flickr.com/photos/sari0009/19354330223/in/dateposted-..

The Paint (and A Closed US Office)

Spelling

Viva Decor’s US office closed in 2015 and my bottle is labeled “Precious Metal Colour” because that is how the UK spells it. Many sites and blogs still use the US spelling (Precious Metal Color), you may notice.

Viva Decor Closed Their USA Office in 2015. European Offices remain open. 2016.

Viva Decor Closed Their USA Office in 2015. European Offices remain open. 2016.

Inclusions Added to the Paint

Precious Metal Colour gold colored paint, specifically, has larger glitter-like particles while the mica powder has super fine (!) particles.

  • Alone, Pearl-Ex mica powder has a very slight orangish undertone by comparison.
  • Alone, Previous Metal Color is a bit bright and silvery.
  • Combined, the color is amazing and the larger particles of the paint aren’t glaringly evident.

So, I added a decent amount of Pearl Ex mica powder to Viva Decor “Precious Metal Colour.”

Rule: With mica powder, less is more, meaning you start by adding very small amounts and adjust according to your liking. I found my mix pleasing as a 14 karat gold color.

This doctored up Viva Decor “Precious Metal Colour” acrylic/enamel paint was painted in 3 or 4 layers on an already baked Premo polymer clay mix.

The bezels were entirely painted with the paint while the figurative beads only had detail work painted.

Heat-setting

All but one were heat-set at 275°F  for 30 minutes. There was no visual or tactile difference between the baked and unbaked paint.

I couldn’t scratch the paint off with a fingernail once the paint was heat-set. The paint looks the most like real gold. I finally, after years of looking for a rather durable solution, now have a tremendous amount of confidence regarding gold detail work on my beads and pendants.

Although Varathane Gloss sealant is one of the top choices for sealing polymer clay, it’s water-resistant, not waterproof. I’d prefer not to have to seal my beads at all.

Acrylic Paints — Drying Time vs. Cured

Note: There is A difference between drying time in curing time. Drying time might occur within minutes or a few hours for acrylic paints while curing time might take a few days. This difference might help explain some problems with heat-setting acrylic paints a polymer clay.

I say it might help explain some of the problems because, according to Blue Bottle Tree, there was a correlation between painting the paint on raw polymer clay before heat-setting and the paint bubbling. This was dependent upon brand of acrylic paint and/or polymer clay, whether the clay was raw or cured, and other factors. For more information, see that Blue Bottle Tree blog post.

One Minor Problem to Solve

When removing these painted bezels from the glossy tile they were baked on, some of the gold paint stuck to the tile. There was enough paint remaining on the bezels so this wasn’t a problem but I’d would still prefer this not  happen.

Perhaps baking on a silicone mat would improve things.

Micaceous Rock and "Yellow Gold Glitter" Premo Polymer Clay Mix, by Karen A. Scofield. 2016.

Polymer Clay Micaceous Rock Composite Goddess Pendants, by Karen A. Scofield. 2016.

Polymer Clay Micaceous Rock Composite Goddess Goddess Pendants, by Karen A. Scofield. 2016.

Polymer Clay Micaceous Rock Composite Goddess Goddess Pendants, by Karen A. Scofield. 2016.

Micaceous Rock and

Micaceous Rock and “Yellow Gold Glitter” Premo Polymer Clay Mix, by Karen A. Scofield. 2016.

Micaceous Polymer Clay Goddess Pendants, by Karen A. Scofield. 2016.

Micaceous Polymer Clay Goddess Pendants, by Karen A. Scofield. 2016.

Appears more glittery and sparkly in person.

Micaceous rock from family land in South Dakota was crushed and added to “Yelllow Gold Glitter” Premo polymer clay — the stronger polymer clay by Sculpey that’s suitable for making thinner beads like this. (Always wear a mask if working with micaceous rock in this manner to avoid permanent lung disease.)

About 2″ long and 1/4 inch thick. Mica powder patterns, a sun or spirals, were stamped into the raw clay before curing. The sun and spiral symbolism can have significance. E.g. http://www.whats-your-sign.com/spiral-meaning.html. Small bead holes are added after curing (now shown), usually after jewelry design is complete. Design may determine hole placement and number.

The finished beads look very much like some of the micaceous earth in South Dakota. The particular rocks used in making this came from family land right by Medicine Mountain, which is sacred land. So these beads have personal significant meaning for me in at least four ways. They are my creative expression, the rock comes from family land, the rock comes from the vicinity of sacred land upon which I attended a ritual, the rock represents time spent with family, and the symbolism is well chosen, of course.

Medicine Mountain Background:www.flickr.com/photos/sari0009/19354330223/in/dateposted-... There are two Medicine Mountains and only one is in South Dakota. The history and backstory for this particular Medicine Mountain is hard to find, hence my link is offered here.

Interesting Factoid: In some areas of South Dakota, the ground glitters like gold due to the earth and rocks’ micaceous (mica-filled) nature and looks magical.

Magic-Glos with Tiny Clay Sculpture and Inclusions by Karen A. Scofield.

Jewelry Resin (Magic-Glos, Ice Resin) Tiny Sculptures, and Bezels

Magic-Glos

Spelling –Magic-Glos is hyphenated and is spelled with only one “s.”

I’m going to discuss Magic-Glos here more because Ice Resin has books based on it. One such book is “Resin Alchemy: Innovative Techniques for Mixed-Media and Jewelry Artists,” by Susan Lenart Kazmer.

 image

Magic-Glos Resources

Lis Pavelka’s Magic-Glos Tips: http://www.lisapavelka.com/wp-content/uploads/2015/04/Magic-Glos-Tips-Tricks-15.pdf

Magic-Glos MSDS (Material Safety Data Sheet): http://www.artclayworld.com/v/vspfiles/assets/MSDS/magic_glos.pdf

Fire Mountain Gems Magic-Glos Tips and Information: http://www.firemountaingems.com/resources/jewelry-making-articles/f35h

Corrections to My Magic-Glos Video (Always Learning!)

1. Don’t seal paper or cardstock inclusions with Mod Podge or PVC (white craft) glues if you’re using them with Magic-Glos — reactions between water-activated mediums, inks, and Magic-Glos can occur over time.

2. Bubbles can be  prevented almost all the time. Read resouces given here. Bubbles can be removed by letting cured item sit one hour, drilling a hole into the bubble, cleaning up drilling debris, adding just enough Magic-Glos, and curing again.

Things Magic-Glos Doesn’t Work Well With:

  • PVC glues – your white craft, nearly all decoupage mediums/glues, and school glues are PVC glues — https://thebluebottletree.com/what-is-the-difference-between-mod-podge-and-acrylic-medium
  • Airdry glues — air-dry glues get trapped under things, don’t cure 100%, then release air bubbles into your curing resin. Use two-part epoxy glue instead!
  • Ice Resin, whether or not each resin is cured or wet (insured) — chemical reaction between the two resins causes cloudiness
  • Water-based sealants – any sealants that are not waterproof after drying (water resistant is not waterproof)
  • Alcohol inks
  • Unsealed inkjet prints
  • Anything that may run or bleed if wet
  • Sharpie markers

If in doubt, test first, often weeks ahead to make doubly sure.

Baking Magic-Glos

Don’t. Don’t bake Magic-Glos. Avoid temperatures over 100 degrees F. See MSDS. 

Warning: Baking Magic-Glos with polymer clay will cause the resin to amber (brown). See MSDS sheet (link given above) for further info.

Magic-Glos Layers

Doming, Pulling Away, and Self-Leveling Properties and What They Mean to the User — The same properties that allow Magic-Glos to dome causes the resin to pull away from edges/periphery in first layer or two, hence a good dome is built up in layers, each of which are cured before the next is added. The last layers are minimal amounts and it may help to spread the resin nearly to the edge (with a toothpick or small ballpoint stylus) and then let Magic-Glos self-leveling finish the job, finally fully covering evenly and doming. Let it sit 10 minutes to 1/2 hour out of UV light to let it finish self-leveling and to let air bubbles make themselves evident. The self-leveling properties mean that you might think you only added enough, the self-doming is a bit of a delayed reaction, and then suddenly you have Magic-Glos running over the sides. If still uncured, it can be cleaned up with cotton swabs and wet wipes but prevention is better than damage control.  Prevention involves adding thinner, multiple layers that are each cured before the next is added and curing your item while on a pedestal — a bit of polymer clay or poster-tx on a craft mirror a bit larger than your piece but small enough to fit in the UV lamp oven.

If the overfill cured, it can be pried off with your hands and/or chipped off with a craft knife.

Minimum Number Of Layers — usually 2 layers, less is more, meaning it’s better to add thin/incomplete layers than to overfill. Thinner layers allows the air bubble popping method of passing a butane mini torch or windproof lighter over the surface of the Magic-Glos for one and only one second.

Note: You don’t have to use seven layers like I did. I used so many layers because I made mistakes and was fiddling with different effects. You can use three layers or more, and maybe less. It depends on what you doing, of course.

Ice Resin

Ice Resin Faux Opal, by Karen A. Scofield. 2016.

Ice Resin Faux Opal, by Karen A. Scofield. 2016.

I also did a faux opal with Ice Resin. Fun!